Mounting rim profile

• For the play-free mounting of surface elements in the profile slot
• For surface elements up to 6 mm thick
• Installation during frame assembly
• Mounting rim profiles PP can also be used as cover profiles

Mounting rim profile, cleanroom

• For the play-free mounting of surface elements in the profile slot
• For surface elements with a thickness of 2–8 mm
• One or both sides of the mounting rim profile used, depending on the thickness of the surface element
• Installation during profile frame assembly
• Suitable for use under clean room conditions

Protective pane profile, PVC

• For the play-free mounting of surface elements in the profile slot
• For surface elements with a thickness of 1.5–8 mm
• For subsequent installation in closed frame constructions
• Installation of surface elements at center of slot
• The protective pane profile consists of the basic profile (A) and the clip-on strip (B)

Protective pane profile, clean room

• For the play-free mounting of surface elements
• For surface elements with a thickness of 2–8 mm
• For subsequent installation in closed frame constructions
• Installation of surface elements flush with the profile edge
• The protective pane profile consists of the basic profile and the clip-on strip. Both profiles are required to ensure proper functioning.

Variofix Block

• For surface elements with a thickness of up to 13 mm
• For subsequent installation in closed frame constructions
• Asymmetrical form enables surface elements to be fastened in two different positions
• Clamping with snap-in clip or screw fitting with square nut M6 (included in scope of delivery) and screw
• Retainer ring for connecting the screw to the surface element (Machinery Directive 2006/42/EC)

Variofix block S

• For virtually gap-free surface element mounting
• For subsequent installation in closed frame constructions
• The asymmetrical design and cover cap enable the surface elements to be mounted in different positions: flush with the profile edge or in front of the profile
• Retainer ring for connecting the screw to the surface element (Machinery Directive 2006/42/EC)

Bracket S

• Bracket with thread for virtually gap-free mounting of surface elements
• For subsequent installation in closed frame constructions
• The surface element can be mounted in different positions: flush with the profile edge or in front of the profile (by breaking off the centering lug)

Retainer ring

• Secures the fastening screw to the surface element
• For use with all Variofix blocks, but not for the S bracket
• Retrofitting possible
• For various thread sizes

Cover strip profile

• Cover strip profile for fastening surface elements using standard sheet metal screws
• Clipping the cover strip profile into the profile slot
• Low-cost connecting element

Universal plate

• For the construction of trays, material shuttles, or privacy shields on tables or frames

Potential equaliser

• Potential equaliser for creating electrostatic conduction between surface elements and strut profiles

Protective grille profile

• For constructing frames for woven wire grilles or surface elements
• For woven wire grilles with a wire diameter of up to 3.1 mm
• For surface elements up to 6 mm thick
• Screw fitting of frame to the outside of strut profile (subsequent installation)
• Insertion of frame into the slot of a strut profile or a sliding door profile Al 45

Clamp bushing

• For fastening woven wire grilles in the profile slot
• For woven wire grilles with a wire diameter of up to 3.1 mm
• Suitable for 8 mm and 10 mm slots
• Low-cost connecting element
• Rattle-free mounting

Plate holder

• For virtually gap-free surface element mounting
• Holders for panel elements in front of the profile
• For panel elements with a thickness of 2 … 6 mm
• For subsequent installation in closed frame constructions
• Protection against disassembly possible with headless setscrew (Machinery Directive 2006/42/EC)