Rexroth Feets and Wheels

For when you need your modular system stationary or portable, Rexroth has got you covered.

Feet

Modular levelling feet

Spindle

  • Levelling feet for compensating irregularities in the floor up to 10°
    – modular system, various combinations possible
    – spindles and base plates can be combined as desired
    – base plates with screw hole for simple screw fitting to the floor
  • Profile finishing: thread M in central hole

Base plate

  • Levelling feet for compensating irregularities in the floor up to 10°
    – modular system, various combinations possible
    – spindles and base plates can be combined as desired
    – base plates with screw hole for simple screw fitting to the floor
  • Profile finishing: thread M in central hole

Base plate with screw hole

  • Levelling feet for compensating irregularities in the floor up to 10°
    – modular system, various combinations possible
    – spindles and base plates can be combined as desired
    – base plates with screw hole for simple screw fitting to the floor
  • Profile finishing: thread M in central hole

Oval base plate with screw hole

  • Levelling feet for compensating irregularities in the floor up to 10°
    – modular system, various combinations possible
    – spindles and base plates can be combined as desired
    – base plates with screw hole for simple screw fitting to the floor
  • Profile finishing: thread M in central hole

Damping plate

  • Leveling feet for compensating irregularities in the floor up to 10°
    – modular system, various combinations possible
    – spindles and base plates can be combined as desired
  • The damping plate prevents the transfer of vibrations and allows a defined conduction of voltages via a set of grounding components

Levelling feet

Levelling foot D20

  • For compensating irregularities in the floor up to 5°
  • Fully assembled spindle and base plate
  • Profile finishing: thread in central hole

Levelling foot D30

  • For compensating irregularities in the floor up to 5°
  • Fully assembled spindle and base plate
  • Profile finishing: thread in central hole

Levelling foot D44, D58, D90

  • For compensating irregularities in the floor up to 5°
  • Fully assembled spindle and base plate
  • Profile finishing: thread in central hole

Damping ring

  • The electrically insulating damping ring prevents the transfer of vibrations and allows a defined conduction of voltages via a set of grounding components

Leveling foot D80

  • For compensating irregularities in the floor up to 5°
  • Fully assembled spindle and base plate
  • Profile finishing: thread in central hole

Foot

  • For compensating irregularities in the floor up to 5°
  • Fully assembled spindle and base plate
  • Profile finishing: thread in central hole

Plate

  • For fastening leveling feet in profiles without a central hole
  • For use as an end connector or T-connector
  • Profile finishing: tapping of thread in the central hole

Threaded Sleeve

  • For fastening levelling feet at an angle to the longitudinal profile direction
  • Profile finishes:
    – blind hole DB17
    – through-hole D17

Base plate, steel

  • For constructing supports for partition walls and protective walls
  • Available in 40×40, 45×45, 40×80, 45×90, 80×80 & 90×90.

Base plate, 135×135

  • For constructing supports for partition walls and protective walls
  • Anchoring with floor dowel

Base plate, 270×360

  • For constructing supports for partition walls and protective walls
  • Anchoring with floor dowel

Base plate, 120×120

  • For flush mounting of supports. No tripping hazards!
  • Markings arranged at the center of the profile for precise alignment
  • Anchoring with floor dowel

Base plate, 150×150

  • For flush mounting of supports. No tripping hazards!
  • Markings arranged at the center of the profile for precise alignment
  • Anchoring with floor dowel

Foot 60×60-80×80

  • For constructing supports made of 80x80L and 60×60 profiles
  • Large installation surface for good stability
  • Easy cleaning due to small number of horizontal surfaces
  • Open on the inside to allow draining of liquids
  • End stop as depth limit for profile (removable)

Floor dowel, washer

  • For anchoring the base plates
  • For leveling on uneven flooring

Wheels

Double wheel

  • Attractive-looking double wheel for light applications
  • Made of oil-resistant material
  • Double wheel with lock
  • Double wheel D50-D10 for insertion in the central hole with a diameter of 10 mm
  • Double wheel D50-M8 for bolting into the profile slot

Roller, gentle on floors

  • Especially gentle on floors
  • Suitable for ESD-sensitive areas. Conductive material version in accordance with DIN EN 61340-5-1; conduction resistance ≤ 106 Ω

Roller, oil-resistant

  • Resistant to oil, for use in workshop areas

Roller, clean room

  • Suitable for use in clean rooms. Conductive material version in accordance with DIN EN 61340-5-1; conduction resistance 103 up to 108 Ω
  • Suitable for ESD-sensitive areas. Conductive material version in accordance with DIN EN 61340-5-1; conduction resistance ≤ 106 Ω

Roller, solid rubber

  • Rubber running surface made of solid rubber with good deformation elasticity. No permanent flattening of the wheel due to it traveling over edges or not being moved for long periods
  • Suitable for ESD-sensitive areas. Conductive material version in accordance with DIN EN 61340-5-1; conduction resistance ≤ 106 Ω

Heavy-duty wheel

  • Heavy-duty wheel with mounting flange
  • Available as a caster wheel with lock, caster, and trestle wheel
  • Heavy-duty, particularly suited for workshop applications
  • Wheels with excellent running properties
  • Screw-on plate for attachment to 40 mm or 45 mm profiles

Lifting wheel

  • Steerable lifting wheel
  • The wheel turns into a stable base simply by engaging the stop lever
  • Screw-on plate for mounting the lifting wheel
  • With “Ideal-Stop”: locking lever does not swivel with the steerable caster but remains in the defined position. The locking lever is fixed in position on the frame by means of the screw-on plate, and the caster wheel moves freely

Roller with mounting flange

  • Robust rollers with mounting flange
  • Good running properties, particularly suitable for workshop areas
  • Available as a caster wheel with lock and as a trestle wheel
  • LR with lock: lock prevents the wheel from rolling or turning

Lifting wheel – Rotatable Pedal

  • Steerable lifting wheel
  • The wheel turns into a stable base simply by engaging the stop lever
  • The locking lever moves with the wheel
  • The locking lever can be moved under the frame if necessary

Lifting wheel – rotatable pedal ESD

  • Steerable lifting wheel
  • The wheel turns into a stable base simply by engaging the lock
  • The locking lever moves with the wheel
  • The locking lever can be moved under the frame if necessary
  • The base is centred under the rotary table

Contact us about Rexroth’s Feets and Wheels

Please contact us using the form below or send us an email.